Tuesday, September 30, 2014
Character Mask
For my drawing class, we had to make a paper bag into a character. I decided to make a character that would be a bit monster-like; sort of like a creature that you would find lurking in your closet or hiding under your bed. I created my mask using a paper bag with red, black, and white paint, red ribbon, and tape covering the cut out pupils of the eyes. After creating the bag, we had to take a photo of the character in its environment. Here's what I came up with.
Recognizing Light
| Sunrise |
| Sunrise |
| 10 AM |
| 10 AM |
| Noon |
![]() |
| Noon |
| 3:30 PM |
| 3:30 PM |
| Sunset |
| Sunset |
| After Sunset |
| After Sunset |
Friday, September 12, 2014
3 Layer Laser Cutting
This is an assignment for my drawing class that I've just completed today. We took photos of different objects to transfer into Adobe Illustrator and make a 3 layer laser cut piece out of. The colors used were white, black, and grey. I decided to do a stuffed giraffe from this picture.
From the picture, I had to simplify it into a design with only the 3 colors mentioned above. Here's what my giraffe looked like after I designed the illustrator document.
Then left the actual laser cutting part which was mainly done by the teacher from Print Services. The back layer doesn't need to be cut because the laser cutter is a subtractive device. My bottom layer was grey. The middle layer cuts out both the middle layer pieces and the top layer pieces. My middle layer was black. The top layer cuts out everything so that it can show both colors of pieces below it. My top layer was white. Here are the photos of how the 3 pieces fit together.
Overall, I thought this was a very interesting project!
From the picture, I had to simplify it into a design with only the 3 colors mentioned above. Here's what my giraffe looked like after I designed the illustrator document.
Then left the actual laser cutting part which was mainly done by the teacher from Print Services. The back layer doesn't need to be cut because the laser cutter is a subtractive device. My bottom layer was grey. The middle layer cuts out both the middle layer pieces and the top layer pieces. My middle layer was black. The top layer cuts out everything so that it can show both colors of pieces below it. My top layer was white. Here are the photos of how the 3 pieces fit together.
Overall, I thought this was a very interesting project!
Wednesday, September 10, 2014
Camera Controls Photography
Second assignment for my Lens-based Communication class. Exploring the different settings on the camera by taking the same photo with high and low aperture, different shutter speeds, and different points of view.
![]() | |
| High Aperture |
![]() |
| Low Aperture |
![]() |
| High Aperture |
![]() |
| Low Aperture |
![]() |
| High Aperture |
![]() |
| Low Aperture |
![]() |
| High Aperture |
![]() |
| Low Aperture |
![]() |
| High Aperture |
![]() |
| Low Aperture |
![]() |
| Point of View |
| Low Shutter Speed |
| High Shutter Speed |
![]() |
| Low Shutter Speed |
![]() |
| High Shutter Speed |
Cell Phone Photography
Subscribe to:
Posts (Atom)


































